Electro-Voice ZLX-15P G2
A powered full-range top, 1 x 15 in LF + 1 x 1.4 in HF compression driver. The figures below have not yet been checked against the datasheet.
Unverified data. Entered from the manufacturer’s page. Check the datasheet before relying on it.
Place it in the plannerSpecifications used
| Maximum level | 129 dB at 1 m |
|---|---|
| Power | 1000 W (rated power as printed (type not specified)) |
| Coverage | 90° horizontal × 60° vertical |
| Frequency range | 42 Hz to 20000 Hz (-10 dB range, half-space; -3 dB response printed as 48 Hz - 18 kHz) |
| Weight | 16.78 kg |
| Size (w × h × d) | 422.8 × 697.6 × 383.1 mm |
| Source | Manufacturer page (2026-10-10) |
How the level was stated. Footnote: measured at 1 m with broadband pink noise at maximum output. Peak or continuous not stated.
Coverage definition. Printed as 90 x 60 degrees, H x V (a stray footnote mark follows the 60); the datasheet does not define the angle (no -6 dB statement).
Notes. No sensitivity printed. No built-in pole socket listed; only optional BRKT-POLE-L bracket (up to 15 in), so poleMount left out.
Coverage shape
What the figures mean at distance
Taking 129 dB at 1 m on axis and the free-field rule of 6 dB lost per doubling of distance, this is the most the speaker can reach and how wide and high its nominal coverage is at each distance. A real room adds reflections, and a speaker is not normally run at its maximum.
| Distance | Level on axis | Coverage width | Coverage height |
|---|---|---|---|
| 2 m | 123.0 dB | 4.0 m | 2.3 m |
| 5 m | 115.0 dB | 10.0 m | 5.8 m |
| 10 m | 109.0 dB | 20.0 m | 11.5 m |
| 15 m | 105.5 dB | 30.0 m | 17.3 m |
| 20 m | 103.0 dB | 40.0 m | 23.1 m |
See level and distance and coverage angles for how these are worked out.
Planning estimate only. The calculation ignores reverberation, reflections and room modes. See terms and disclaimer.