JBL EON715

A powered full-range top, 1 x 15 in LF + 1 in compression driver HF. The figures below have not yet been checked against the datasheet.

Unverified data. Entered from the manufacturer’s page. Check the datasheet before relying on it.

Place it in the planner

Specifications used

Maximum level	128 dB at 1 m
Power	1300 W (peak; page also prints 650 W RMS)
Coverage	90° horizontal × 60° vertical
Frequency range	45 Hz to 20000 Hz (-10 dB; -3 dB point is 55 Hz low end; no tolerance stated)
Weight	17 kg
Size (w × h × d)	438 × 716 × 358 mm
Pole socket	Yes
Source	Manufacturer page (2026-10-10)

How the level was stated. Printed as "128dB @1m/4Pi" (1 m, full-space); peak vs continuous, noise type and crest factor not stated.

Coverage definition. Printed as horizontal and vertical dispersion; measurement definition (-6 dB etc.) not stated on the page.

Notes. No sensitivity printed. 36 mm pole socket. Dimensions from spec table (H x W x L) reordered to w,h,d; the features list on the same page differs slightly. Features list says 16.9 kg and 702 x 438 x 351 mm.

Coverage shape

Horizontal: 90° (seen from above)

Vertical: 60° (seen from the side)

What the figures mean at distance

Taking 128 dB at 1 m on axis and the free-field rule of 6 dB lost per doubling of distance, this is the most the speaker can reach and how wide and high its nominal coverage is at each distance. A real room adds reflections, and a speaker is not normally run at its maximum.

Distance	Level on axis	Coverage width	Coverage height
2 m	122.0 dB	4.0 m	2.3 m
5 m	114.0 dB	10.0 m	5.8 m
10 m	108.0 dB	20.0 m	11.5 m
15 m	104.5 dB	30.0 m	17.3 m
20 m	102.0 dB	40.0 m	23.1 m

See level and distance and coverage angles for how these are worked out.

Planning estimate only. The calculation ignores reverberation, reflections and room modes. See terms and disclaimer.