NEXO P8

A passive full-range top, 1 x 8 in coaxial LF + 1.5 in HF. The figures below have not yet been checked against the datasheet.

Unverified data. Entered from the manufacturer’s page. Check the datasheet before relying on it.

Place it in the planner

Specifications used

Maximum level	129 dB peak at 1 m
Sensitivity	101 dB at 1 W, 1 m
Power	550 W (recommended power range 350 to 550 W into 8 ohm (upper figure))
Coverage	100° horizontal × 100° vertical
Frequency range	66 Hz to 20000 Hz (-6 dB; no +/- tolerance printed)
Weight	12 kg
Size (w × h × d)	276 × 423 × 250 mm
Pole socket	Yes
Source	Manufacturer page (2026-10-10)

How the level was stated. Printed as Peak SPL at 1 m; noise type and crest factor not stated.

Coverage definition. Default 100x100; optional 110x60 horn. Page does not label axes or give the -dB definition, and does not say which axis is horizontal for the 110x60 horn (rotatable status not stated on this page).

Notes. Pole socket: touring version handles hold a 35 mm pole stand adapter (install version has no handles). Dimensions printed H x W x D 423 x 276 x 250.

Coverage shape

Horizontal: 100° (seen from above)

Vertical: 100° (seen from the side)

What the figures mean at distance

Taking 129 dB at 1 m on axis and the free-field rule of 6 dB lost per doubling of distance, this is the most the speaker can reach and how wide and high its nominal coverage is at each distance. A real room adds reflections, and a speaker is not normally run at its maximum.

Distance	Level on axis	Coverage width	Coverage height
2 m	123.0 dB	4.8 m	4.8 m
5 m	115.0 dB	11.9 m	11.9 m
10 m	109.0 dB	23.8 m	23.8 m
15 m	105.5 dB	35.8 m	35.8 m
20 m	103.0 dB	47.7 m	47.7 m

See level and distance and coverage angles for how these are worked out.

Planning estimate only. The calculation ignores reverberation, reflections and room modes. See terms and disclaimer.