QSC KS112
A powered subwoofer, 1 x 12 in cone. The figures below have not yet been checked against the datasheet.
Unverified data. Entered from the manufacturer’s page. Check the datasheet before relying on it.
Place it in the plannerSpecifications used
| Maximum level | 128 dB peak at 1 m |
|---|---|
| Power | 2000 W (Class D amplifier, peak) |
| Pattern | omni |
| Frequency range | 38 Hz to ? Hz (-10 dB points (-6 dB range also printed); upper -10 dB point 121 Hz) |
| Weight | 28.4 kg |
| Size (w × h × d) | 394 × 622 × 616 mm |
| Pole socket | Yes |
| Source | Manufacturer page (2026-10-10) |
How the level was stated. Measured on-axis at 1 m, pink noise, 10 dB crest factor, unweighted (per page footnote).
Notes. Page states omni-directional radiation. Two M20 threaded pole receptacles; pole not included. Dimensions labelled H x W x D.
What the figures mean at distance
Taking 128 dB at 1 m on axis and the free-field rule of 6 dB lost per doubling of distance, this is the most the speaker can reach at each distance. A real room adds reflections, and a speaker is not normally run at its maximum.
| Distance | Level on axis |
|---|---|
| 2 m | 122.0 dB |
| 5 m | 114.0 dB |
| 10 m | 108.0 dB |
| 15 m | 104.5 dB |
| 20 m | 102.0 dB |
See level and distance and coverage angles for how these are worked out.
Planning estimate only. The calculation ignores reverberation, reflections and room modes. See terms and disclaimer.