RCF ART 710-A MK5

A powered full-range top, 1 x 10 in LF (2.5 in v.c.) + 1 x 1.0 in HF (1.75 in v.c.). The figures below have not yet been checked against the datasheet.

Unverified data. Entered from the manufacturer’s page. Check the datasheet before relying on it.

Place it in the planner

Specifications used

Maximum level	129 dB at 1 m
Power	1400 W (peak, total 2-way amplifier (400 W HF + 1000 W LF peak); no RMS figure on page)
Coverage	90° horizontal × 70° vertical
Frequency range	50 Hz to 20000 Hz (range as printed; no tolerance stated)
Weight	14.2 kg
Size (w × h × d)	340 × 548 × 305 mm
Pole socket	Yes
Source	Manufacturer page (2026-10-10)

How the level was stated. Printed as Max SPL @ 1m; no other conditions (noise type, crest factor) stated on the page.

Coverage definition. Printed as horizontal x vertical; page calls it a wide dispersion constant directivity horn and does not define the angle (no -6 dB statement). Not stated as rotatable.

Notes. Current MK5 page, not marked archived. Pole mount: 35 mm insert. Page prints no loudspeaker sensitivity (only input sensitivity).

Coverage shape

Horizontal: 90° (seen from above)

Vertical: 70° (seen from the side)

What the figures mean at distance

Taking 129 dB at 1 m on axis and the free-field rule of 6 dB lost per doubling of distance, this is the most the speaker can reach and how wide and high its nominal coverage is at each distance. A real room adds reflections, and a speaker is not normally run at its maximum.

Distance	Level on axis	Coverage width	Coverage height
2 m	123.0 dB	4.0 m	2.8 m
5 m	115.0 dB	10.0 m	7.0 m
10 m	109.0 dB	20.0 m	14.0 m
15 m	105.5 dB	30.0 m	21.0 m
20 m	103.0 dB	40.0 m	28.0 m

See level and distance and coverage angles for how these are worked out.

Planning estimate only. The calculation ignores reverberation, reflections and room modes. See terms and disclaimer.