Yamaha DXS15 mk3
A powered subwoofer, 1 x 15 in LF (3 in voice coil). The figures below have not yet been checked against the datasheet.
Unverified data. Entered from the manufacturer’s page. Check the datasheet before relying on it.
Place it in the plannerSpecifications used
| Maximum level | 133 dB peak at 1 m |
|---|---|
| Power | 1250 W (RMS (peak 2500), measured at minimum load impedance with protection released) |
| Pattern | omni (assumed: the source does not say) |
| Frequency range | 35 Hz to ? Hz (-10 dB; upper limit printed as 140 Hz (omitted from freqHigh because validator range starts at 1000)) |
| Weight | 37 kg |
| Size (w × h × d) | 480 × 611 × 614 mm |
| Pole socket | Yes |
| Source | Manufacturer page (2026-10-10) |
How the level was stated. Page states "Measured peak, IEC noise at 1 m".
Notes. Spec page lists no cardioid mode (page summary mentions cardioid options in general; not confirmed per model). Pole socket 35 mm (80 mm deep) and M20 thread.
What the figures mean at distance
Taking 133 dB at 1 m on axis and the free-field rule of 6 dB lost per doubling of distance, this is the most the speaker can reach at each distance. A real room adds reflections, and a speaker is not normally run at its maximum.
| Distance | Level on axis |
|---|---|
| 2 m | 127.0 dB |
| 5 m | 119.0 dB |
| 10 m | 113.0 dB |
| 15 m | 109.5 dB |
| 20 m | 107.0 dB |
See level and distance and coverage angles for how these are worked out.
Planning estimate only. The calculation ignores reverberation, reflections and room modes. See terms and disclaimer.